← All insights

Microfiber Leather Structure and Comparison With Conventional PU Coated Fabrics

Microfiber leather is frequently presented as an alternative to PU leather. This comparison needs clarification: many microfiber leather constructions also contain polyurethane.

“Microfiber” describes the fiber structure, whereas “PU” identifies a polymer. A more useful comparison is between a microfiber-based composite and a conventional PU-coated textile of a defined construction.

How a Microfiber Composite Is Built

A representative approach combines a three-dimensional nonwoven microfiber network with polyurethane. Kuraray describes this construction for CLARINO, including an impregnated nonwoven base and grain or suede finishing options.[1]

The fine fiber network supports the composite throughout its thickness. A grain surface can be added through coating, while a suede appearance can be developed through surface finishing.

The exact fiber type, density, binder content, and surface treatment vary by grade. These variables should be specified rather than inferred from the word microfiber.

How the Structure Differs

A conventional coated textile may rely on a distinct woven or knitted backing supporting a polymer coating. A microfiber-based composite instead develops its body from a fine-fiber network and polymer distributed within that structure.

This distinction can influence edge appearance, skiving behavior, hand feel, and the way a cut component responds during assembly. Kuraray identifies cutting and skiving as processing options for its microfiber materials.[1]

Those examples demonstrate the possibilities of the construction. They do not establish that every material sold as microfiber leather has identical processing behavior.

Grain and Suede Require Different Evaluations

A grain material presents a finished coating to the user. Relevant properties may include coating adhesion, abrasion, flexing, staining, and gloss retention.

A suede material has an exposed fibrous surface. Its appearance can change with nap direction, brushing, compression, or local rubbing. Evaluate shading, fiber release, color transfer, and cleaning response alongside strength.

For either type, specify the direction in which panels should be cut. Consistent orientation can matter when adjacent pieces reflect light differently.

Construction exampleStructural distinctionEvaluation focus
Conventional PU-coated textileA distinct woven or knitted backing supporting a polymer coatingThe specified backing, coating and finished assembly
Microfiber composite with a grain surfaceFine-fiber network with polymer; finished grain coatingCoating adhesion, abrasion, flexing, staining and gloss retention
Microfiber composite with a suede surfaceExposed fibrous surface developed through finishingNap direction, shading, fiber release, color transfer and cleaning response
Compare defined constructions, rather than material names alone

Match the Grade to the Component

For a shoe upper, examine flexibility, extension, recovery, and compatibility with lasting and bonding. For a lining, consider rubbing against socks, moisture exposure, and color transfer.

For an accessory with exposed edges, evaluate the actual cut, edge finishing, fold, and stitch arrangement. A material that looks attractive as a flat swatch may behave differently around a tight fold or narrow seam allowance.

These are product-development checks, not automatic advantages of a material category.

Do Not Infer Performance From the Name

Microfiber structure alone does not establish water-vapor transmission, hydrolysis resistance, washability, electrical conductivity, or chemical compliance.

Kuraray’s material guidance, for example, ties care instructions to the particular product and notes that other components can restrict washing.[2] The same principle applies when selecting any composite: assess the complete construction and finished assembly.

Ask for test evidence tied to the quoted grade, thickness, color, and finish.

Build a Controlled Comparison

Compare microfiber and conventional coated candidates using the same component drawing, assembly method, and test conditions.

A useful evaluation matrix includes:

  • Total thickness and mass per unit area.
  • Extension and recovery in the relevant directions.
  • Tear, seam, and bond performance.
  • Surface appearance after wear and cleaning.
  • Aging resistance appropriate to the environment.
  • Cutting yield and production reject rate.

Record how each candidate fails, not just whether it passes. A coating crack, seam tear, bond failure, and unacceptable shading require different material or design changes.

The resulting evidence provides a practical basis for selecting a grade and setting production requirements.

References

  1. Kuraray. (n.d.). How CLARINO™ Differs from General Synthetic Leather.Technical resource · Accessed 6 November 2026.
  2. Kuraray. (n.d.). CLARINO™ Material: Manufacturing & Innovation.Technical resource · Accessed 6 November 2026.

← Back to insights